Annotation Properties

You can view or edit properties of individual annotation. To view or edit annotation properties, follow the steps given below:

  1. Click or touch the right side menu to open the Map Legend panel.
  2. In the Map Legend, click or touch the annotation to open its properties. You may touch the annotation again to close the properties dialog box.
    Note: You may or may not see all the properties option. It is displayed on the basis of selected annotation.
    Note: The units are displayed as per the configured measurement system in the project. For example,
    • Line: If the length is greater than 1000 meter, unit is converted to km, if the length is greater than 5280 ft, unit is converted to mile.
    • Circle/Sector: If the radius is greater than 1000 meter, unit is converted to km. If the radius is greater than 5280 ft, unit is converted to mile.
    • Polygon/Rectangle: If the area is greater than 1000*1000 sq meter, unit is converted to sq km. If the area is greater than 5280 * 5280 sq ft, unit is converted to sq mile.
    • Ellipse: If the major axis is greater than 1000 meter, unit is converted to km. If the major axis is greater than 5280 ft, unit is converted to mile.
    • Concentric Circle: If the innermost circle radius is greater than 1000 meter, unit is converted to km. If the radius is greater than 5280 ft, unit is converted to mile.
    • DriveDistance: If the innermost travel cost is greater than 1000 meter, unit is coverted to km. If the travel cost is greater than 5280 ft, unit is converted to mile.
    Table 1. Point Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Add Buffer Enter a buffer value to apply to the selected annotation.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 2. Line Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Length Displays the length of line annotation.
    Add Buffer Enter a buffer value to apply to the selected annotation.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 3. Circle Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Radius Displays the radius.
    Perimeter Displays the perimeter in selected unit.
    Area Displays the area in selected unit.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 4. Polygon Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Perimeter Displays the perimeter in selected unit.
    Area Displays the area in selected unit.
    Add Buffer Enter a buffer value to apply to the selected annotation.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 5. Rectangle Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Perimeter Displays the perimeter in selected unit.
    Area Displays the area in selected unit.
    Rotation Enter the value to rotate the selected annotation.
    Add Buffer Enter a buffer value to apply to the selected annotation.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 6. Concentric Ring Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    No. of Rings Enter the total number rings. You can enter minimum 2 to maximum 5 rings only.
    Equidistant Tap to create rings at equal distances.
    Custom Tap to create rings at customized distances. The radius text box appears on the basis of total number of rings. The last radius text box cannot be edited. It displays the value entered in Outermost Radius text box.
    Radius Displays the radius.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 7. Ellipse Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Perimeter Displays the perimeter in selected unit.
    Area Displays the area in selected unit.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Major Axis Displays the diameters (lines through the center) of the ellipse. The major axis is the longest diameter.
    Minor Axis Displays the diameters (lines through the center) of the ellipse. The minor axis is the shortest diameter.
    Rotation Enter the value to rotate the selected annotation from the center.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 8. Sector Annotation
    Properties Description
    Units Displays the measurements of selected annotations like area, length and perimeter. You can select various measurement units from the drop-down list. The supported measurement units are Meters, Feet, Yards, Kilometers, Miles, Acres, and Hectares. The default measurement unit will be the configured map unit for all annotations.
    Perimeter Displays the perimeter in selected unit.
    Area Displays the area in selected unit.
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Arc Radius Displays the radius of an arc.
    Arc Span Display the span of an arc. By default, the arc span is 30 degree.
    Sector Direction Displays the angle between positive x-axis and the line drawn from origin point to middle point of the arc. The value can be 0 to 359 degrees.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 9. Text Annotation
    Properties Description
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Rotation Enter the value to rotate the selected annotation from the center.
    Apply Tap to apply changes to annotation properties.
    Cancel Tap to cancel and close the properties dialog box.
    Table 10. Drive Time\Distance Annotation
    Properties Description
    Center X Enter the value of x to relocate an existing annotation to a new location.
    Center Y Enter the value of y to relocate an existing annotation to a new location.
    Routing Database Select the database to use (For example, Pedestrian, Driving)
    No. of Rings Enter the total number rings. By default, 1 ring is created. You can increse upto maximum 5 rings only.
    Travel Time If Travel Time is chosen then further options are:
    • Time Units- The units to return time. The default is min (minute). Available values are: min(minute), s(second), h(hour).
    • Historic Speed Profile- Specifies whether the routing calculation uses the historic traffic speeds. These speeds are based on different time-of-day buckets. The data must have historic traffic speeds included in order to use this feature. The data for each country/region has the same bucket definitions, where the speeds for these bucket values may vary. The options are:
      • None- The default value. Historic traffic data is not used in the calculation. Instead an averaged speed value is used.
      • AMPeak- Calculate routes with the peak AM speeds. The AMPeak time bucket is from 07:00 to 10:00hr time of day.
      • PMPeak- Calculate routes with the peak PM speeds. The PMPeak time bucket is from 16:00 to 19:00hr time of day.
      • OffPeak- Calculate routes with the off peak (daytime) speeds. The OffPeak time bucket is from 10:00 to 16:00hr time of day.
      • Night- Calculate routes with the nighttime speeds. The Night time bucket is from 22:00 to 04:00hr time of day.
    • Time- Enter time.
    Travel Distance If Travel Distance is chosen then further options are:
    • Distance units- The units to return distance. The default is m (meter). Available values are: m(meter), km(kilometer), yd(yard), ft(foot), mi(mile).
    • Distance- Enter distance.
    Apply Click or tap to apply changes to annotation properties.
    Cancel Click or Tap to cancel and close the properties dialog box.