Address Location Codes

Location codes that begin with an "A" are address location codes. Address location codes indicate a geocode made directly to a street network segment (or two segments, in the case of an intersection).

An address location code has the following characters.


1^st character	Always an A indicating an address location.
2^nd character	May be one of the following
	`C`	Interpolated address point location
	`G`	Auxiliary file data location
	`I`	Application infers the correct segment from the candidate records
	`P`	Point-level data location
	`R`	Location represents a ranged address
	`S`	Location on a street range
	`X`	Location on an intersection of two streets
3^rd and 4^th character	Digit indicating other qualities about the location.

Address Location Code Descriptions


Code		Description
`AGn`		Indicates an auxiliary file for a geocode match where n is one of the following values:
	`n = 0`	The geocode represents the center of a parcel or building.
	`n = 1`	The geocode is an interpolated address along a segment.
	`n = 2`	The geocode is an interpolated address along a segment, and the side of the street cannot be determined from the data provided in the auxiliary file record.
	`n = 3`	The geocode is the midpoint of the street segment.
`APnn`		Indicates a point-level geocode match representing the center of a parcel or building, where nn is one of the following values:
	`nn = 02`	Parcel centroid Indicates the center of an accessor's parcel (tract or lot) polygon. When the center of an irregularly shaped parcel falls outside of its polygon, the centroid is manually repositioned to fall inside the polygon as closely as possible to the actual center.
	`nn = 04`	Address points Represents field-collected GPS points with field-collected address data.
	`nn = 05`	Structure centroid Indicates the center of a building footprint polygon, where the building receives mail or has telephone service. Usually a residential address consists of a single building. For houses with outbuildings (detached garages, shed, barns, etc.), only the residences have a structure point. Condominiums and duplexes have multiple points for each building. Larger buildings, such as apartment complexes, typically receive mail at one address for each building and therefore individual apartments are not represented as discrete structure points. Shopping malls, industrial complexes, and academic or medical center campuses where one building accepts mail for the entire complex are represented as one point. When addresses are assigned to multiple buildings within one complex, each addressed structure is represented by a point. If the center of a structure falls outside of its polygon, the center is manually repositioned to fall inside the polygon.
	`nn = 07`	Manually placed Address points are manually placed to coincide with the midpoint of a parcel's street frontage at a distance from the center line.
	`nn = 08`	Front door point Represents the designated primary entrance to a building. If a building has multiple entrances and there is no designated primary entrance or the primary entrance cannot readily be determined, the primary entrance is chosen based on proximity to the main access street and availability of parking.
	`nn = 09`	Driveway offset point Represents a point located on the primary access road (most commonly a driveway) at a perpendicular distance of between 33-98 feet (10-30 meters) from the main roadway.
	`nn = 10`	Street access point Represents the primary point of access from the street network. This address point type is located where the driveway or other access road intersects the main roadway.
	`nn = 21`	Base parcel point When unable to match to an input unit number, or when the unit number is missing from an address location with multiple units, the "base" parcel information is returned, the address is not standardized to a unit number, and additional information, such as an Assessor's Parcel Number, is not returned.
	`nn = 22`	Backfill address point The precise parcel centroid is unknown. The address location assigned is based on two known parcel centroids.
	`nn = 23`	Virtual address point The precise parcel centroid is unknown. The address location assigned is relative to a known parcel centroid and a street segment end point.
	`nn = 24`	Interpolated address point The precise parcel centroid is unknown. The address location assigned is based on street segment end points.
`AIn`		The correct segment is inferred from the candidate records at match time.
`ASn`		House range address geocode. This is the most accurate geocode available.
AIn and ASn, and ACnn share the same qualities for n as follows:
	`n = 0`	Best location.
	`n = 1`	Street side is unknown. The Census FIPS Block ID is assigned from the left side; however, there is no assigned offset and the point is placed directly on the street.
	`n = 2`	Indicates one or both of the following: The address is interpolated onto a TIGER segment that did not initially contain address ranges. The original segment name changed to match the USPS spelling. This specifically refers to street type, predirectional, and postdirectional. Note: Only the second case is valid for non-TIGER data because segment range interpolation is only completed for TIGER data.
	`n = 3`	Both 1 and 2.
	`n = 7`	Placeholder. Used when starting and ending points of segments contain the same value and shape data is not available.
`ACnh`		Indicates a point-level geocode that is interpolated between 2 parcel centroids (points), a parcel centroid and a street segment endpoint, or 2 street segment endpoints.
	The ACnn 4^th digit characteristics are as follows:
	`n = 0`	Represents the interpolation between two points, both coming from User Dictionaries.
	`n = 1`	Represents the interpolation between two points. The low boundary came from a User Dictionary and the high boundary, from a non-User Dictionary.
	`n = 2`	Represents the interpolation between one point and one street segment end point, both coming from User Dictionaries.
	`n = 3`	Represents the interpolation between one point (low boundary) and one street segment end point (high boundary). The low boundary came from a User Dictionary and the high boundary from a non-User Dictionary.
	`n = 4`	Represents the interpolation between two points. The low boundary came from a non-User Dictionary and the high boundary from a User Dictionary.
	`n = 5`	Represents the interpolation between two points, both coming from non-User Dictionaries.
	`n = 6`	Represents the interpolation between one point (low boundary) and one street segment end point (high boundary). The low boundary came from a non-User Dictionary and the high boundary from a User Dictionary.
	`n = 7`	Represents the interpolation between one point and one street segment end point and both came from non-User Dictionaries.
	`n = 8`	Represents the interpolation between one street segment end point andone point, both coming from User Dictionaries.
	`n = 9`	Represents the interpolation between one street segment end point (low boundary) andone point (high boundary). The low boundary came from a User Dictionary and the high boundary from a non-User Dictionary.
	`n = A`	Represents the interpolation between two street segment end points, both coming from User Dictionaries.
	`n = B`	Represents the interpolation between two street segment end points. The low boundary came from a User Dictionary and the high boundary from a non-User Dictionary.
	`n = C`	Represents the interpolation between one street segment end point (low boundary) and one point (high boundary). The low boundary came from a non-User Dictionary and the high boundary from a User Dictionary.
	`n = D`	Represents the interpolation between one street segment end point and one point, both coming from non-User Dictionary.
	`n = E`	Represents the interpolation between two street segment end points. The low boundary came from a non-User Dictionary and the high boundary from a User Dictionary.
	`n = F`	Represents the interpolation between two street segment end points, both coming from non-User Dictionaries.
`ARn`		Ranged address geocode, where n is one of the following:
	`n = 1`	The geocode is placed along a single street segment, midway between the interpolated location of the first and second input house numbers in the range.
	`n = 2`	The geocode is placed along a single street segment, midway between the interpolated location of the first and second input house numbers in the range, and the side of the street is unknown. The Census FIPS Block ID is assigned from the left side; however, there is no assigned offset and the point is placed directly on the street.
	`n = 4`	The input range spans multiple USPS segments. The geocode is placed on the endpoint of the segment which corresponds to the first input house number, closest to the end nearest the second input house number.
	`n = 7`	Placeholder. Used when the starting and ending points of the matched segment contain the same value and shape data is not available.
`AXn`		Intersection geocode, where n is one of the following:
	`n = 3`	Standard single-point intersection computed from the center lines of street segments.
	`n = 8`	Interpolated (divided-road) intersection geocode. Attempts to return a centroid for the intersection.